HP PSC 1410 All-In-One no longer prints

10-11  Source: Network gathering  Views:0 

I have an HP 1410 all in one. I also recently updated to Mac OS X 10.5 Leopard. My printer no longer prints. It will show up in the print queue and the status will say printing but nothing will happen. After a few seconds it claims the printer is ready to print and stops any jobs in the queue. I have tried resetting the printer, tested all the connections, power cycled it both with the power switch and power cable, restarted my computer multiple times, I've tried updating the drivers (but I'll try again here in a minute), and I'm out of ideas. Any suggestions?
Am (attempting) to print direct from my MacBook - admittedly I did not install any printer drivers during the Leopard (clean) install and am a bit confused as to whether I'm now using the right one, but from what I can gather from the threads like this now littering this forum it wouldn't have made much of a difference. I had infact presumed my problem was just that - that I hadn't the right driver.
Like I hinted at previous; I can reconnect the HP to my old G4 running Tiger and print with no trouble whatsoever.
Trying to print from Leopard brings up the print dialog, and subsequent utility as it should but then nothing - as if the MacBook's not talking with the HP (though it happily recognises it as being there and what model it is etc.).
I have not yet attempted to print over the network, mainly because I couldn't succeed as is. Or tried to scan as it happens (I hardly ever use the built in scanner as I have a better one and the PSC is my backup - I scan a lot in my job).
Related articles
  • HP PSC 1410 All-In-One no longer prints 10-11

    I have an HP 1410 all in one. I also recently updated to Mac OS X 10.5 Leopard. My printer no longer prints. It will show up in the print queue and the status will say printing but nothing will happen. After a few seconds it claims the printer is rea

  • HP PSC 1410 All in One HANG INDEFINITELY with Remote Downlevel Document 10-11

    Hi, after a few days of setting up my PSC 1410 All In One Printer, which is hooked up to a Compaq Presario V3000 running on Windows XP SP3 with AMD Turion 64x2 processor; and shared print to a Sony Vaio VGN FW33G, and a Mac Pro running on Snow Leopar

  • HP PSC 1410 All In One, have driver problems..​..........​..........​......... 10-11

    I have an HP PSC 1410 All in one printer that I cannot print items from my computer on. When I try to print something from my computer my computer tells me that no driver for the printer  is detcted but when I open "MY COMPUTER" and click Device

  • HP Psc 1410 all in one series Printing pink 10-11

    Printer - HP Psc 1410 all in one series Operating system - Microsoft windows Vista 32 bit Ive installed the driver and the software but when i print colour the colour is pink. When I print in black and white it prints fine jsut colour is all pink. Ja

  • Not able to install scanner part of 'HP PSC 1410 all-in-one'[SOLVED] 10-11

    Despite trying instructions in the wiki, checking earlier reports of this problem on the forum and trying on reports from google, I am not able to install the scanner part of 'HP PSC 1410 all-in-one'.  The command 'sane-find-scanner' finds it but 'sc

  • HP PSC 1410 All in one Printer not installed 10-11

    In windows 8 after complete and lastest installation of Driver of HP PSC 1410v All in one, in the Control Pannel, Device and Printer Tab only scanner icon is showing no any printer icon and no other HP Icon, so i can use scanner only of this model bu

  • My HP psc 1210 all-in-one, suddenly stopped printing any text. it will print the graphics. 10-11

    I believe I have tried everything. The HP psc 1210 series all-in-one refusses to print text. nor will it scan or copy. I have done all the troubeshooting that I can find. Still will not print from PC or copy. I think it will scan to the computer. Ico

  • Re: how do i install a hp psc 1410 all in one printer without the disk? 10-11

    how to install?lection wrote: how to install? Install what?  If it is the PSC 1410 then what operating system? Do you have a 32 bit or 64 bit version?  See my post here.  If a different printer model please start a new thread after reading  this post

  • HP PSC 1410 All-In-One printer problem! 10-11

    I have a PSC 1410 for a while now and I reinstalled Windows 7 recently and now the printer's not detected but I can scan documents. What could be the problem? It was working fine before I reinstalled Windows 7 and I've obviously installed the drivers

  • HP PSC 1410 All in One 10-11

    My HP Solution Center for this device, with no warning, failed to operate. I can click on the desktop icon or in "All Programs" and get no response. However the HP Photosmart Essential 3.5 , inttaslled at the same time, opens as usual. I can sti

  • PSC 1350 all-in-one not completing print jobs wirelessly with windows 7 64 bit 10-11

    I have a acer 5542 running windows 7 (64bit), connected wirelessly to an Orange Livebox hub, to which my HP PSC 1350 printer is connected (via USB cable) therefore using the Livebox as a USB printer server. This configuration has worked very well for

  • HP 6110 All-in-one no longer prints...print jobs sit in queue 10-11

    My printer worked fine last week and now I went to print somethign and it just sits in queue.  I tried uninstalling/reinstalling the drivers, running the HP Diagnostic (which says everything seems fine) but nothing prints.   Any ideas on how to get t

  • PSC 1510 All in One won't print black 11-30

    Had printer for couple of years. Suddenly has decided doesn't want to print black. Tried everything. Have noticed other HP models on forum have same problem. One tag mentioned taking colour cartridge out and then it prints in black. Tried this but pr

  • Hp psc 1110 all-in-one printer-co​pier-scann​er 10-11

    Recently I've been experiencing a problem with my printer (hp psc 1110 all in one):  it will print fine, then suddenly it will not print even though the print job is listed in the que.  If you turn the printer on and off, it will then "flash" in

  • HP PSC 2410 All-In-One - use in Windows 7 64-bit environment 10-11

    Hi, I have had this HP PSC 2410 All-In-One printer for some years now and it has worked pretty flawlessly in a Windows XP Pro SP3 environment for that time. Some months ago, I purchased a new computer system and went to the Windows 7 64-bit OS (not i

  • Installing HP PSC 1350 all-in-one printer/scanner 10-11

    In the past, I could usually solve the "Offline" or "Not Connected" problems by unplugging my printer for a few minutes, but that no longer works. So, I decided to buy another one. However, just before clicking on the BUY button on Ama

  • HP psc 2110 all in one and Windows 7 10-11

    I have an old HP psc 2110xi all in one printer that worked fine on Windows XP.  I followed the HP site instructions and did not try to load the install disc that came with it on my new Windows 7 64-bit computer.  I just plugged it in and Windows 7 wa

  • Psc 1315 all-in-one printer will not feed paper. There is no paper jam. 10-11

    psc 1315 all-in-one printer has stopped feeding paper. There is no paper jam.hi there sorry to learn that you are having this issue. Are you still facing this issue? If you are I will do my best to help you. Have you upgraded the firmware of your pri

  • HP PSC 1210xi all-in-one 10-11

    Hello, I've been trying to get the HP PSC 1210xi All-in-One running as I won't be able to use my current scanner soon. However, it fails to run due to missing drivers. I'm running Windows 8.1 (64bit), which causes me some concern to the compatibility

  • Psc 1210xi all-in-one not responding 10-11

    My psc 1210xi all-in-one is not responding. I was able to use the stand alone copy feature and also print a document from my hp laptop (Windows 7) successfully last night. (After plugging it into this laptop for the first time by the way.) Now I am t